Before you start Ensure that you have installed wvdial, usbmodeswitch and usbmodeswitch_data # dpkg -l | grep wvdial # dpkg -l | grep modeswitch Install it from your ISO or any other source. Be careful about the proper version is installed. Be sure that USB driver modules are loaded. # lsmod | grep usb This should show that USB Serial driver is loaded # usbserial 36911 2 option,usb_wwan Load it if not. # modprobe usbserial Tata photon+ Huawei EC1561 Manufacturer ID 12d1 Product ID 1446 $ sudo su - Connect your dongle # lsusb This should show the device as Bus 003 Device 009: ID 12d1:140b Huawei Technologies Co., Ltd. EC1260 Wireless Data Modem HSD USB Card # modprobe usbserial vendor=0x12d1 product=0x1446 # usb_modeswitch -I -W -c /etc/usb_modeswitch.d/12d1\:1446 Run wvdialconf. Then make it to look like the one below. This is a simple configuration. I will show you how to add both Tata Huawei EC1561 and MTS ZTE together at the bottom of
This is an attempt by me to explore articles and News related with Technology(especially IT),Film,Art,etc Actually this is my personal documentation area where I keep projects' documents and the Tutorials I have read through in the Internet. Have a look and let me know your opinion