Skip to main content

How to Disable Alt+Ctrl+Bksp and Ctrl+Alt+Function Keys

System administrators should be aware that now there is the ability to turn off switching to text mode virtual terminals via CTL-ALT-FunctionKey. This can come in handy when locking down a system (such when a Linux box is used as a kiosk) when used in conjunction with disabling CTL-ALT-BKSP (forceful kill of the X server). To do this, edit your /etc/X11/XF86Config or /etc/X11/xorg.conf and add the following:

Section "ServerFlags"
# prevent the use of CTL-ALT-F1, etc
Option "DontVTSwitch" "On"
# prevent the use of CTL-ALT-BKSP
Option "DontZap" "On"
EndSection


Here the Vitrual Consoles can be locked in /etc/inittab also

Open /etc/inittab and comment the following

1:2345:respawn:/sbin/mingetty tty1
2:2345:respawn:/sbin/mingetty tty2
3:2345:respawn:/sbin/mingetty tty3
4:2345:respawn:/sbin/mingetty tty4
5:2345:respawn:/sbin/mingetty tty5
6:2345:respawn:/sbin/mingetty tty6

You can shift the Virtual Consoles from Alt+Ctrl+F1 -> F6 to Alt+Ctrl+F8 -> F12
To do so edit /etc/securetty.And rename the tty entries by the number of Virtual Terminal you want to use

eg :
console
vc/1
#vc/2
#vc/3
#vc/4
#vc/5
#vc/6
#vc/7
#vc/8
#vc/9
#vc/10
#vc/11
#tty1
#tty2
#tty3
#tty4
#tty5
#tty6
#tty7
#tty8
#tty9
#tty10
#tty11
tty12

This will enable a single Console at tty12 ie, Alt+Ctrl+F12 Keystroke
Reboot the machine to get affected by the changes made.

Comments

Popular posts from this blog

Check remote UDP connectivity from Linux

Hi there, You all know how to check TCP port connectivity from a Linux or UNIX machine to a remote machine using telnet as per th example below $ telnet 127.0.0.1 25 but we can't adopt TELNET to check UDP connectivity. Linux and most of the UNIXes come with a network layer utility called nc (abbreviation for netcat) which is very useful to check UDP connectivity and to explore a lot with both TCP and UDP. An example is shown below # nc -v -u -z -w 3 172.24.16.131 123 Connection to 172.24.16.131 123 port [udp/ntp] succeeded!

The best putty package available

Bored of Black screened Task bar filling putty? Issues with porting Saved sessions from machine to machine? Do you like tabbed SSH sessions? Start using portaputty instead of normal putty and link it with puttycm . Puttycm supports sessions to be saved in its own Database files. You can use the Putty sessions you have saved already right inside putty. You can have any number of databases which allow you to arrange Remote servers in folders and convenient namings. I personally recommend creating Database with puttycm rather than using the sessions saved in putty which doesn't offer any option to create folders and saving sessions under that directory tree. You can even save username/password to get it logged automatically and there is an option to pass commands to be run soon after login. I can't recommend this since some bug was found with these options. Portaputty is a variant of putty which stores all the Configuration data in text files instead of MS Window

PING.sh

#!/usr/bin/env bash ## Ping all machines in a Network PING="$(which ping) -c 1 -W 1" echo "Enter Subnet(eg:192.168.0)" read Subnet echo "Do you want to PING the entire network or a RANGE of IPs ? Enter your choice" echo 1. Ping Entire Network echo 2. Ping a RANGE read choice if [ $choice = 1 ]; then { echo Pinging..... for((i=1;i<255;i++)); do ${PING} ${Subnet}.${i} > /dev/null 2> /dev/null if [ $? -eq 0 ]; then echo -e "${Subnet}.${i} is up" fi done } fi if [ $choice = 2 ]; then { echo Enter the Starting IP of Range read a echo Enter the Last IP of Range read b echo Pinging..... for((i=$a;i<$b;i++)); do ${PING} ${Subnet}.${i} > /dev/null 2> /dev/null if [ $? -eq 0 ]; then echo -e "${Subnet}.${i} is up" fi done } fi exit 0